You Searched For: Extraction+Cabinets


5 308  results were found

SearchResultCount:"5308"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: LABCONCO
Description: Accessory shelf, 4'

Supplier: Sartorius Balances
Description: Disposable chute bag

Supplier: CleanAir by Baker
Description: Lighting system for NEG 5

Supplier: Bohlender
Description: Anodized aluminium frame with panels made of polycarbonate.

Supplier: LABCONCO
Description: Double HEPA filtration kit, for 2' balance system

Supplier: asecos
Description: Recirculating air filter system UFA.20.30
Avoid complex wall, ceiling and roof penetrations and costly extract systems. Safe capturing of escaping vapours at the point where they are released or produced.
High flexibility in choosing the installation location
Active personal protection through safe capture of harmful vapours with retention in the filter system
Very low noise, ~39 dB(A)
ATEX complient: CE II 3/-G Ex ic nA IIB T4 Gc
Housing made of sheet-steel plastic laminated
With multistage filter system and power cord
Incl. VDE tested extraction and filter monitoring
Optical and acoustical alarm including potential-free alarm contact
Dimensions W×D×H: 305×555×210 mm
The plug-in recirculating air filter system UFA.20.30 is capable of retaining solvent vapours (hydrocarbons) permanently up to a filter saturation of more than 99,999%, under normal operating conditions as well as for a simulated accident in the safety storage cabinet.
A special version of the recirculating air filter system UFA.20.30-AUS is also available to meet the pressure conditions and volumetric flows of safety storage cabinets with a small internal volume. It can be installed on a wall bracket or in a convenient housing unit.

Supplier: LABCONCO
Description: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Supplier: LABCONCO
Description: XPert™ filtered balance stations are vented balance enclosures designed to protect the user during powder weighing operations. The built-in HEPA filter, mounted in the upper plenum, removes particulates, so that clean air is exhausted to the atmosphere. XPert® filtered balance station is 'stationary' because ducting to an outside blower or house exhaust system is required. Powder weighing applications found in pharmaceutical research and other industries are ideal for these enclosures. Interior dimensions accommodate large micro and analytical balances and containment-enhancing features ensure personnel safety.

Supplier: asecos
Description: Powder coated steel tube with wall mount and flat hoods. Can be easily fastened onto workbenches, tables. It can be easily adjustable has suction valve with swivel function.

Supplier: LABCONCO
Description: In nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained. Room air is pulled into the enclosure from the front, flows to the baffle, and finally passes through a ULPA exhaust filter (99,999% efficient on particles 0,12 μm in size) before returning to the laboratory or cleanroom.

Supplier: CleanAir by Baker
Description: These powder fume hoods are used wherever harmful powders or dusts are released, e.g. when weighing. The hoods guarantee the highest degree of protection for the user and the environment. The housing consists of water-tight plywood, entirely covered with a white plastic film and a hood of hardened glass.

Supplier: LABCONCO
Description: XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters.

Supplier: LABCONCO
Description: XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters, carbon filters, or a combination of both HEPA and carbon filters.

Catalog Number: (LBCP3961622)
Supplier: LABCONCO
Description: XPert™ Bulk Powder Filtered System is designed to provide user protection from hazardous airborne particulates and fumes generated during powder transfer operations. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to maximize containment. The system includes a built-in blower, 99,99% efficient HEPA filter, true bag-in/bag-out filter disposal system, and pre-wired fluorescent light and switches for blower and light.
UOM: 1 * 1 items


Supplier: LABCONCO
Description: Retaining bands

Supplier: LACONT UMWELTTECHNIK
Description: Safety cabinets for the storage of hazardous substances are provided with a DN 80 exhaust air connection. The forced ventilation can be carried out by one of our standard extraction fans or by a suitable in-house air extraction system. The exhaust air is to be discharged from the building into a hazard-free zone.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Dual use goods can only be delivered within the European Union.
Dual use goods can only be delivered within the European Union.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +43 1 97002 - 0.
1 - 16 of 5 308
no targeter for Bottom