Print…

You Searched For: Microbiology+Test+Systems


91 525  results were found

Refine Results Sort by
SearchResultCount:"91525"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-111-2587

Qualitative fit testing kit, JSP LTD

Supplier: JSP
Description: Dust and half masks commonly fail to do the job they are intended to do because of poor fitting and care by the user. Qualitative Fit Testing can be used not only as a test method to ensure wearers are properly protected, but also as a very effective way of training them in the correct way of fitting a mask.

Product Image-489-0145

Seal seam integrity test, Stericlin®

Supplier: VP Medical Packaging
Description: Stericlin® seal seam integrity tests are used for routine testing of seal seams according to DIN EN ISO 11607. In combination with the Seal Test they offer comprehensive and secure routine testing for the heat sealing process.

Product Image-489-0148

Seal test, Stericlin®

Supplier: VP Medical Packaging
Description: The Stericlin® Seal Test is used for routine testing of seal seams according to DIN EN ISO 11607. In combination with the seal seam integrity test it offers the most comprehensive and reliable routine examination for the heat sealing process.

Product Image-HAVE205324420

Accessories for VWR® Ultrasonic Sieving System

Supplier: VWR Collection
Description: Clamping ring for test sieves Ø 200 mm

Product Image-SART16476-GSD

Sterility test system, Sterisart® NF

Supplier: Sartorius
Description: The Sterisart® NF System is a completely disposable technology based on the membrane filtration method, for the sterility testing of pharmaceutical products. It makes aseptic sampling easy, during or after incubation which is required for dilution or rapid detection, or for the supplement of additives for inactivation of antibiotics.

Product Image-JULA9021709.D

Beer forcing test refrigerated/heating circulating bath, DYNEO™ DD-1001F-BF

Catalog Number: (JULA9021709.D)
Supplier: JULABO GmbH
Description: The JULABO beer forcing test bath in conjunction with a photometer determines the product life of beer before clouding. The simulated aging process is achieved through a programmable temperature profile, which is repeated, until the first clouding develops.
UOM: 1 * 1 items
Product Image-GILI2614010

ASPEC® 274 system

Catalog Number: (GILI2614010)
Supplier: GILSON LCMS
Description: This ASPEC® system for positive pressure solid phase extraction (SPE) automation maximises throughput by processing up to four samples in parallel. With its small footprint and multiple probes, it is the ideal choice for reproducible and efficient sample cleanup for clinical, forensic, doping, food, and environmental testing labs.
UOM: 1 * 1 items
Product Image-HERA51033759

Herasafe™ 2030i CTS™ Biological Safety Cabinets

Supplier: Thermo Scientific
Description: Thermo Scientific™ Herasafe™ 2030i Biological Safety Cabinet Cell Therapy Systems (CTS™) Series consists of equipment, documentation and certifications to support your Good Manufacturing Practice (GMP) needs.

Product Image-710-0960

Gravimetric dilutors, Smart Dilutor W

Supplier: IUL Instruments SA
Description: The Smart Dilutor W automates and facilitates the precise gravimetric dilution of samples, that is a key process stage in microbiology laboratories.The system incorporates a peristaltic pump linked with a load cell to rapidly and accurately dilute the sample to a preset dilution factor. The sample bag, typically a pre-sterilised 400 ml blender bag is attached to a bag holder which effectively serves as the weighing platform, making the process simple to operate, disassemble and clean.

Product Image-MMMA393-2026-50

Flexible fit probed test earplugs, E-A-R™

Catalog Number: (MMMA393-2026-50)
Supplier: 3M
Description: E-A-R™ Flexible Fit Earplugs equipped with a probe tube for fit testing using the 3M™ E-A-Rfit™ Dual-Ear Validation System. Cannot be used for hearing protection.
UOM: 1 * 50 PAIR
Image Unavailable-A6929-40X3ML

Histopaque®, sterile filtered, Sigma-Aldrich®

Catalog Number: (A6929-40X3ML)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: ACCUSPIN System-Histopaque-1077 products are intended for use in the isolation of lymphocytes and other mononuclear cells. The separation medium, Histopaque-1077, is a sterile-filtered, endotoxin-tested solution of polysucrose and sodium diatrizoate, adjusted to a density of 1,077 g/ml. ACCUSPIN System-HISTOPAQUE-1077 employs γ-irradiated 12mL polypropylene centrifuge tubes specially designed with two chambers separated by a porous high-density polyethylene barrier ('frit'). Each tube is aseptically filled with 3 mL of Histopaque 1077. Each tube will separate 3 to 6 ml of anticoagulated blood.
UOM: 1 * 1 Each
Product Image-HEIP1460020120

Settle plates, single-bagged

Supplier: MERCK LIFE SCIENCE
Description: A wide range of ready-to-use culture media for the environmental monitoring. 90 mm LI (Long Incubation) plates for the determination of the total cell count and for the test for specified microorganisms

Image Unavailable-MILXEFAAW100B

EZ-Fit® Filtration Unit with Absorbent Pad

Catalog Number: (MILXEFAAW100B)
Supplier: Merck
Description: <p>The EZ-FIT<sup>®</sup> filtration unit is a single-use filtration device made of white, gridded, and mixed cellulose esters (MCE) membrane with a blue base integrating a cellulose support pad. It provides a safe and fast way of performing membrane filtration by avoiding the exposure to the risks of microbiological analysis.</p>
UOM: 1 * 1 items

New Product


Product Image-513-2152

Nalgene® Membrane Filters

Supplier: Thermo Fisher Scientific
Description: <B>Type 205: </B>Cellulose nitrate, sterile. Certified to meet requirements of standard methods for water quality control for microbiological analysis, sterility tests, food and beverage testing. Individually wrapped.

Certificates Environmentally Preferable

Product Image-710-0904

VWR®, Igientest HACCP

Supplier: VWR Collection
Description: A simple, quick test for hygiene control of work surfaces. Application fields: Food industry, catering, dairy industry, health authorities and HACCP consultants. A colorimetric scale to interpret the results is printed on each tube. The comparison between the solution colour and the colorimetric scale confirms if the surface is clean or dirty. It’s enough to streak the wet swab on a surface, and to insert it into the tube. Break the glass vial contained in the tube by using the clamp. At the end of the test the tube can be disposed of as normal waste. Room temperature storage.

MSDS Certificates

Product Image-172-5109

Water purification system, Milli-DI®

Catalog Number: (172-5109)
Supplier: Merck
Description: The compact, easy to use Milli-DI® water purification system has been designed especially to meet a need for small quantities of pure water, between 3 and 5 litres per day. The water produced is suitable for use in chemical and electrochemical applications, for the production of buffers, reagents and microbiological culture media, and a multitude of other applications. Milli-DI® water can also be used as feed water for ultrapure water systems.
UOM: 1 * 1 items
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Dual use goods can only be delivered within the European Union.
Dual use goods can only be delivered within the European Union.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +43 1 97002 - 0.
113 - 128 of 91 525
no targeter for Bottom