Print…

You Searched For: BUCHI


26 362  results were found

Refine Results Sort by
SearchResultCount:"26362"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-135-1934

Recirculating air filter system and extraction units

Supplier: asecos
Description: Recirculating air filter system UFA.20.30
Avoid complex wall, ceiling and roof penetrations and costly extract systems. Safe capturing of escaping vapours at the point where they are released or produced.
High flexibility in choosing the installation location
Active personal protection through safe capture of harmful vapours with retention in the filter system
Very low noise, ~39 dB(A)
ATEX complient: CE II 3/-G Ex ic nA IIB T4 Gc
Housing made of sheet-steel plastic laminated
With multistage filter system and power cord
Incl. VDE tested extraction and filter monitoring
Optical and acoustical alarm including potential-free alarm contact
Dimensions W×D×H: 305×555×210 mm
The plug-in recirculating air filter system UFA.20.30 is capable of retaining solvent vapours (hydrocarbons) permanently up to a filter saturation of more than 99,999%, under normal operating conditions as well as for a simulated accident in the safety storage cabinet.
A special version of the recirculating air filter system UFA.20.30-AUS is also available to meet the pressure conditions and volumetric flows of safety storage cabinets with a small internal volume. It can be installed on a wall bracket or in a convenient housing unit.

Image Unavailable-IKAA25004318

Weighing Stand, IKA [scale]

Catalog Number: (IKAA25004318)
Supplier: IKA
Description: A stand with an integrated scale and data interface: only available from IKA. The IKA [scale] provides increased comfort and safety for your laboratory applications. For example, your stirrer can hang on the stable support rod. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process.
UOM: 1 * 1 items
Product Image-139-0231

Self-retracting lifelines, Miller® Falcon™

Supplier: HONEYWELL SAFETY
Description: These self-retracting lifelines are the ideal fall protection device for use at low heights, where lanyards with shock absorbers cannot generally be used. The self-retracting lifelines can be used in many different contexts, e.g. the construction industry, manufacturing, supply and disposal.

Product Image-CPSDAM450/100

Nylon webbing sling, Protecta®, DBI-SALA®, 3M™

Catalog Number: (CPSDAM450/100)
Supplier: CAPITAL SAFETY
Description: Polyester webbing slings are made from top quality materials guaranteeing high strength and durability. Can be used as versatile temporary anchorage solution.
UOM: 1 * 1 items
Product Image-HECH49075010

Face shields, medical Assistant®

Catalog Number: (HECH49075010)
Supplier: GLASWARENFABRIK KARL HECHT
Description: This disposable face shield consists of a headband band made of non allergenic fleece and a transparent PC visor. The face shield covers the entire face, not just the area around the eyes (for example, like safety glasses). This considerably reduces the risk of infection. It is ideal for use in orthopaedics, during general operations, in surgery, urology and dentistry. The shield can also be used by emergency services, as well as in laboratories and emergency wards.
UOM: 1 * 1 items
Product Image-111-3715

Safety spectacles dispensers, SecuBox Maxi12 and Midi4

Supplier: GEBRA
Description: These dispensers can be used to store visitor spectacles.

Product Image-115-2676

Web self-retracting lifeline, DBI-SALA® Nano-Lok™, 3M™

Supplier: CAPITAL SAFETY
Description: Nano-Lok™ is compact and ergonomically designed for ease-of-use, and is ideal as a direct connection to most harnesses. Weighing only 725g, it is virtually unnoticeable when worn. It can be used as a lanyard replacement. Locks quickly and stops a fall within centimetres, providing more protection at low heights.

Product Image-115-2721

Cleaning wipe rolls

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG
Description: <B>Multitex® strong, reusable:</B> Particularly tear-resistant viscose fleece wipes, suitable for wet and dry cleaning. The cloths are solvent-resistant and they meet food safety requirements. Multitex® cloths can be washed out after cleaning and reused.

Product Image-111-1460

Optifit Twin Full Face Masks

Supplier: HONEYWELL SAFETY
Description: Twin filter masks give general protection against particulates and/or toxic gases. They can only be used in sufficiently ventilated premises where the atmosphere contains a mininum oxygen volume of 17%.

Product Image-111-1389

Emergency rescue sling, Miller®

Catalog Number: (111-1389)
Supplier: HONEYWELL SAFETY
Description: Used by many leading rescue services around the world, this comfortable and easy to use rescue sling is based on a helicopter sling: The chest strap can be undone and fitted around the casualty while remaining attached to the rescue system.
UOM: 1 * 1 items
Product Image-BDAM305901

Intramuscular safety needles, BD SafetyGlide™

Catalog Number: (BDAM305901)
Supplier: BD Medical
Description: Detachable, disposable, shielding hypodermic needle, stainless steel latch. The BD SafetyGlide™ shielding hypodermic needle is a single-handed, needle-based safety device that can be used with any size conventional syringe. Detachable needle fits on any size conventional syringe, which helps to facilitate standardisation and SKU reduction.
UOM: 1 * 500 items
Product Image-PRSIPM-6143

Anti-LIN28 Mouse Monoclonal Antibody

Catalog Number: (PRSIPM-6143)
Supplier: ProSci Inc.
Description: Lin28 Monoclonal Antibody: Lin28 is a transcription factor that was first identified through its key role in the pathway of developmental timing in C. elegans. The role of Lin28 in development suggested that it might be useful in the creation of stem cells that might be beneficial in cell replacement therapies in the treatment of several degenerative diseases. Artificial stem cells, termed induced pluripotent stem (iPS) cells, can be created by expressing Lin28 in addition to the transcription factors POU5F1, Sox2, and NANOG in mouse fibroblasts. More recently, experiments have demonstrated that iPS cells could be generated using expression plasmids expressing Lin28, Sox2, POU5F1 and c-Myc, eliminating the need for virus introduction, thereby addressing a safety concern for potential use of iPS cells in regenerative medicine.
UOM: 1 * 100 µG
Product Image-111-2494

Face shield, DFS1

Catalog Number: (111-2494)
Supplier: Bollé Safety
Description: The DFS1 face shield perfectly protects against splashes and droplets. Designed to fit first reponders’ needs, DFS1 is simple to use, economic, protective, and can be worn over glasses.
UOM: 1 * 1 KIT
Product Image-PRSI5581

Anti-POU5F1 Rabbit Polyclonal Antibody

Catalog Number: (PRSI5581)
Supplier: ProSci Inc.
Description: POU5F1 Antibody: POU5F1, also commonly known as Oct-4, is a maternally expressed octamer-binding protein that was the first transcription factor described for the early stages of development. The role of POU5F1 in embryonic development suggested that it might be useful in the creation of stem cells that might be useful in cell replacement therapies in the treatment of several degenerative diseases. Artificial stem cells, termed induced pluripotent stem (iPS) cells, can be created by expressing POU5F1 and the transcription factors Sox2, Klf4 and Lin28 along with c-Myc in mouse fibroblasts. More recently, experiments have demonstrated that iPS cells could be generated using expression plasmids expressing POU5F1, Sox2, KlfF4 and c-Myc, eliminating the need for virus introduction, thereby addressing a safety concern for potential use of iPS cells in regenerative medicine.
UOM: 1 * 100 µG
Product Image-111-1455

Full face masks, Panoramasque

Catalog Number: (111-1455)
Supplier: HONEYWELL SAFETY
Description: Panoramasque is a full face mask dedicated to offer respiratory protection, depending on the canister type assembled on it. For optimal protection, it is recommended to use aluminium or plastic Honeywell (Sperian) filters. They can only be used in sufficiently ventilated premises where the atmosphere contains a minimum oxygen volume of 17%.
UOM: 1 * 1 items
Product Image-WART8.204.000

Fuego SCS and Fuego SCS pro gas safety burners

Supplier: WARTEWIG
Description: Fuego SCS and Fuego SCS pro gas safety burners have the latest safety technology. Thanks to their innovative design and an extensive range of standard equipment, these laboratory gas burners are suitable for all applications that require a flame in the laboratory. The low profile housing allows you to work in comfort, and the streamlined design reduces the impact of air currents on clean room workbenches. The SCS (safety control system) uses the latest safety technology, constantly analysing potential dangers and triggering protective measures when necessary - such as the interruption of the gas supply. After prolonged use a residual heat indicator signals that the burner head is still hot, to help to prevent burns. Made entirely of stainless steel, and thanks to its fireproof controls and a display protected by special glass, the Fuego SCS can withstand even extreme laboratory conditions.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Dual use goods can only be delivered within the European Union.
Dual use goods can only be delivered within the European Union.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +43 1 97002 - 0.
289 - 304 of 26 362
no targeter for Bottom