You Searched For: EDWARDS HIGH VACUUM METTLER

Supplier: EDWARDS HIGH VACUUM METTLER

Description: ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Elbows 90°, DN 40 mm, Stainless steel

Supplier: EDWARDS HIGH VACUUM METTLER

Description: T-pieces made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Catalog Number: (EDWAH11150001)

Supplier: EDWARDS HIGH VACUUM METTLER

Description: A range of Apiezon® greases is offered for use on high vacuum systems and for many general applications in the laboratory. These high purity greases are non-toxic, are easy to apply and clean off and have long shelf lives.

UOM: 1 * 25 g

Sale

Supplier: EDWARDS HIGH VACUUM METTLER

Description: The XDS pumps are used as a patented bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Adjustable gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS-C range are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Vacuum Diaphragm Pump, Electrical supply cable 2 m, north europe

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Cross pieces made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Blanking flanges made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: These high performance rotary pumps are used in many industrial and laboratory applications. They offer the option of high throughput or high ultimate vacuum by the adjustment of a single control. RV pumps can be run continuosly with inlet pressures up to 50 mbar or can be set to achieve an ultimate partial pressure of 1×10⁻⁴ mbar. For drying applications the water handling capability is 290 g per hour at vapour pressures up to 80 mbar (RV 12).

Catalog Number: (181-0359)

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Pump includes all of the components required for laboratory applications such as those found in wet chemistry and sample preparation. It allows for continuous running even in the presence of water and solvents and incorporates an integral fast acting inlet valve that holds the system under vacuum in case of a power failure. Ideal for use with rotary evaporators, centrifugal concentrators, vacuum ovens, distillation/extraction apparatus, fume hoods, glove boxes and vacuum filtration equipment.

UOM: 1 * 1 items

Sale

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Mist filters are used to separate and trap oil mist and dischage the odours with the exhaust from oil sealed rotary vacuum pumps.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Hinged clamps for NW flanges made of aluminium.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Blade kit pump

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Inlet Desiccant Trap IDT20K: Use when pumping limited quantities of water vapour at high pumpings speeds to a low vapour pressure.

Catalog Number: (181-0362)

Supplier: EDWARDS HIGH VACUUM METTLER

Description: These XDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including water, solvents, dilute acids and bases. It also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Comes with integrated inverter drive with auto sensing voltage input delivers optimised pumping performance. The pumps are completely field serviceable.

UOM: 1 * 1 items

Sale